Master Member
加入日期: Nov 2001
文章: 1,880
|
【問題】ASUS M13H 無法啟動Thunderbolt 4 USB4 20Gb/s模式?
今年一直在炒作的USB4 20/40Gb/s,據說要搭配Thunderbolt 4,才能支援。
今天沒事拿出USB 20Gb/s外接盒,在ASUS M13H中,針對TB4,作了以下 設定,想要啟動USB4 20Gb/s模式(這是ASUS官方網站的文宣)。 結果。。。。。 接在主機板上的TB4 Type C接頭上,搭配asm2364,如下圖,只能跑到USB 10Gb/s 傳輸率,不論是用什麼USB 20Gb/s線測試都上不了。 請問是asm2364上不了TB4 USB4 20Gb/s? 還是TB4 USB4 20Gb/s沒設定好? 因為asm2364接Z590 USB 20Gb/s是正常的傳輸率。 請高手幫我解惑,因為網路上似乎沒人在討論這個情況。打電話去ASUS 0800永 遠都是制式的請將主機板送回檢測的標準制式說法,超懷念以前打去的技術客服幾 乎都聽得懂問題。 |
|||||||
2021-04-18, 08:28 PM
#1
|
Major Member
加入日期: Jul 2001
文章: 260
|
依據 USB4 spec 1.0 , USB3 adapter layer 對於 gen2 dual-lane (2x2) 只是 optional ,大部分的情況下沒支援也不意外...
9.2.1 Link Layer An internal USB3 device port that interfaces to a USB3 Adapter Layer shall implement a Link Layer as defined in the USB 3.2 Specification with the modifications, configurations, and parameters described in this section. The Link Layer shall support Gen 2 Single-Lane (2x1) and may support Gen 2 Dual-Lane (2x2). No other Link capabilities shall be supported. An Internal USB3 device shall not send a LBPM PHY Capability with a value of 0 in bits [3:2]. Note: The USB3 LBPM handshake between the two internal USB3 devices ports determines the link that will be established. 至於 USB4 支援 TB3 20Gb/40Gb 的部分,那就跟 USB 關係比較小了 === 剛看了一下,這板子還有一個寫 SS20 的 2x2 port ,支援 20Gb/s 應該是這個吧? 此文章於 2021-04-18 09:12 PM 被 Howard C. Lu 編輯. |
||
2021-04-18, 08:51 PM
#2
|
Master Member
加入日期: Nov 2001
文章: 1,880
|
了解。。原來我對TB4-USB4.0期望太高,結果一試全破滅,謝謝您的上課。
M13H是有提供Intel USB 3.2 Gen2x2 20Gb/s Type E前置接頭,背板提 供的只有USB 3.2 Gen2 10Gb/s Type A接頭,若要使用USB 20Gb/s 前置接頭,有些機殼或是Type C前置面板都上不去,目前只試到一款Type E 轉Type C擋板是上得去。 現階段ASUS系列很多主機板的USB 3.2 Gen2x2都是擺在前置接頭,無言的 設計。。目前僅試過它們家的Z590-A才大方地給USB 3.2 Gen2x2後置Type C接頭。 |
2021-04-19, 10:33 PM
#3
|