|
||
|
Basic Member
加入日期: Mar 2001 您的住址: 台灣
文章: 13
|
如題
------------------ --DVD--- |
|||||||
2001-04-29, 09:38 AM
#1
|
|
|
New Member
加入日期: Apr 2001 您的住址: 高雄,台灣
文章: 9
|
|
||
|
2001-05-01, 03:07 PM
#2
|
|
|
Basic Member
加入日期: Mar 2001 您的住址: 台灣
文章: 13
|
感謝大哥這麼多天來只有您回應,但小弟英文實在很破不知網站到底在說什麼,可否在救救我/謝謝!
|
|
2001-05-03, 01:58 PM
#3
|
|
|
Junior Member
  加入日期: Feb 2001 您的住址: Taiwan Taichung
文章: 884
|
去下載全區的軔體!! 找你dvd的型號然後下載!解壓 執行
更新完成 重開機 !! acer 變 pioneer 全區機囉!! |
|
2001-05-04, 11:36 AM
#4
|
|
|
Master Member
加入日期: Apr 2001 您的住址: POLICE RESCUE
文章: 2,198
|
嗯…我的dvd-rom是afreey 10x，
而且韌體版本是41，在Mr.過客提供的網址中找到一些訊息… 但是… The 41 firmware fix some reading bugs. 這表示版本41已修正一些讀取的問題 If you have the RPC-2 firmware 40, you can make the drive to RPC-1 (region free). 我並沒有版本40，所以我的作法就是下載網址上的40版本？ The trick is to put a jumper on the middle set of pins to the left of the digital audio out (on the far left of the back of the drive). 此句不太懂…是說把jumper從中間的位置調到digital audio out的 左邊？ 誰能替我說明一下怎麼調嗎？ If you update or already have the firmware 41, which 我的版本的確是41… you have to anyway cause of it's reading problem with firmware 40... 這句是強調不管如何為了變成40的版本，就得不管讀取上的問題…嗎？ then set the jumper to exactly the same place which described for the old firmware 40. jumper調成和40版本的相同？ Then eachtime you boot your pc, 每當開機時， hold the two buttons on the frontside of the dvd-panel pressed, 按住dvd-rom前的兩個按鈕？ then the drive became absolutely codefree (RPC-1). 就會變成rpc-1。 NOTICE: you have to do this everytime you boot up! 注意…每次開機時都得這麼做才行，（連重開機也是嗎？） otherwise it will just keep the old RPC-2 settings. 不然會保持在rpc-2的設定。 RPC-1 with firmware 31 RPC-2 with firmware 40 and 41 請有心人士確定一下我說的對不對， 並且指導一下正確的jumper調法吧… |
|
2001-05-07, 11:19 AM
#5
|
|
