LSISAS2208, MR5.6, 23.12.0.0011:
http://www.lsi.com/downloads/Public...240.05-2282.zip
Bug Fixes and Enhancements:
===========================
FIRMWARE:
SCGCQ00343193 - (Closed) - FW crashes during foreign configuration import.
SCGCQ00353334 - (Closed) - Evaluation Order Violation
SCGCQ00353358 - (Closed) - Operands don't affect result
SCGCQ00353906 - (Closed) - Development tool fixes
SCGCQ00358678 - (Closed) - Enclosure was not detected.
SCGCQ00369216 - (Closed) - OVERRUN STATIC: CIDs 10281, 10283 Out-of-bounds access
SCGCQ00369611 - (Closed) - Development tool fixes
SCGCQ00369667 - (Closed) - Drives need to be marked foreign when its state changes to unconfigured good and it has a valid DDF.
SCGCQ00372061 - (Closed) - Development tool fixes
SCGCQ00363693 - (Closed) - Development tool fixes
SCGCQ00364253 - (Closed) - UNUSED VALUE : CIDs 10376, 10377, 10398, 10399
SCGCQ00378971 - (Closed) - Continues PR 2nd time on Raid 1 and then delete VD and reboot system cause debugger to continues loop and want to run PR
SCGCQ00384874 - (Closed) - MR5.6 Beta Firmware BST: MonTask: line 5911 in file ../../raid/pd.c
SCGCQ00356781 - (Closed) - System hanged after pulling out drives from a 8Raid-6 array during OCR in Debian OS
SCGCQ00358060 - (Closed) - Logically dead code
SCGCQ00358069 - (Closed) - In printMrLdConfig(), pointer is checked against null but then dereferenced anyway
SCGCQ00359118 - (Closed) - Firmware does not allow CacheCade VDs to be created
SCGCQ00364620 - (Closed) - Fix For development tool Defects Reported
SCGCQ00381562 - (Closed) - "Assertion failure in ../../raid/mem.c at line 281" on issuing "adpdiag" from megacli-dos
SCGCQ00353296 - (Closed) - Get_Time_Delta() has incorrect pointer increment
SCGCQ00357185 - (Closed) - In configRaid, value returned from a function is not checked for errors before being used
SCGCQ00375418 - (Closed) - Fix For development tool Defects Reported
SCGCQ00375763 - (Closed) - Firmware asserted at raid/cache.c at line 3661 when VDs are offline
SCGCQ00378916 - (Closed) - Timed critical boot message under UEFI mode not showing
SCGCQ00380450 - (Closed) - MegaCli pdFwDownload fails on a SATA drive with an interposer (parent defect is SCGCQ00352210)
SCGCQ00365342 - (Closed) - Wrong value returned for the field "CacheOffLoad" under the class "lsiesg_megaraidhbaadvancesoftware".
SCGCQ00391493 - (Closed) - Firmware blocked firmware download to interposer
SCGCQ00331565 - (Closed) - Punctured Block Logging Improvements
SCGCQ00348163 - (Closed) - Fault LED behavior in OEM Blades
SCGCQ00318098 - (Closed) - temporary patch.
SCGCQ00331572 - (Closed) - Boot the system to iMR mode if NVRAM is not initialized.
SCGCQ00357927 - (Port_Complete) - We should not be directly unregistering the device from the DISM code. As, we do have a proper device removal state machine scheduled in the task list to do that.
SCGCQ00361327 - (Port_Complete) - A good SuperCap could be prematurely marked as failed.
SCGCQ00367948 - (Port_Complete) - FW goes to montask at cache offload.
SCGCQ00372173 - (Port_Complete) - MR2208 JBOD function can't handle the UNC error of SATA disk
SCGCQ00374198 - (Port_Complete) - A SuperCap could be shown as prematurely failed if a reboot occurred immediately after a learn cycle completed.
SCGCQ00374208 - (Port_Complete) - If a double bit error occurs during memory initialization on a OEM controller, GPIO 19 will now be asserted.
SCGCQ00357590 - (Port_Not_Required) - CSET: MR_DS3: all PDS missing after few rounds of enclosure pull/push run. - (SCGCQ00354731)
SCGCQ00360912 - (Port_Complete) - VD becomes WT with a good & new Super Cap on boot
SCGCQ00364140 - (Port_Complete) - Error Message "incompatible secondary iButton present!" or "BIOS handshaking With The FW,Wait" shown
SCGCQ00373302 - (Port_Complete) - SCSI Pass-Through to SAS SSD returns data but disk reported medium error
SCGCQ00374201 - (Port_Complete) - The SuperCap will now remain in the failed state when its capacitance falls below the minimum or its resistance exceeds the maximum
SCGCQ00357221 - (Port_Complete) - Cache offload would not work when a USB debugger was attached
SCGCQ00374210 - (Port_Complete) - multi path with Consistency Check LED behavior problem
SCGCQ00357937 - (Port_Complete) - We should not add a SEP device to the enclosure tracker.
SCGCQ00360965 - (Port_Complete) - VD Degraded after reconstruction of R5
SCGCQ00381794 - (Port_Complete) - T-Bolt MR Controller Rejects Vendor Unique SCSI Command
SCGCQ00381812 - (Port_Complete) - (multiple) Megacli64 error in deadlock state

WebBIOS
SCGCQ00288524 - (Closed) - Remaining capacity is coming 0 from FW.
SCGCQ00308400 - (Closed) - WebBIOS does not warn user before importing PI enabled VD on PI disabled controller.
SCGCQ00309063 - (Closed) - WebBIOS does not show "Day" for Next learn cycle time in battery page. And issue with safe mode.
SCGCQ00327325 - (Closed) - FW completely halted/hung when selecting drives in WebBIOS after reinserting drives with pinned cache present present
SCGCQ00308556 - (Closed) - Preboot apps have to change load address change because of FW changes.
SCGCQ00308401 - (Closed) - WebBIOS reports incorrect number of foreign configs during "Scan Devices"
SCGCQ00309056 - (Closed) - WebBIOS should not allow RLM for protected VDs with non-PI drives.
SCGCQ00318379 - (Closed) - "4K sector support"
SCGCQ00344103 - (Closed) - Not able to associate multiple VDs in a cache pool.
SCGCQ00309218 - (Closed) - WebBIOS displays SSD association screen for Secured and Protected VDs (Virtual drive table is empty).
SCGCQ00342568 - (Closed) - User is not able to see offline virtual drive property page.
SCGCQ00322775 - (Closed) - "Boot error handling" options are not correct in WebBIOS.
SCGCQ00289513 - (Closed) - Battery Firmware vesion(MR_BBU_DESIGN_INFO.moduleVersion) is coming as Null
SCGCQ00322246 - (Closed) - Add 4k sector support in WebBIOS
SCGCQ00324759 - (Closed) - bit in MR_PD_INFO for SSD Qualifier: SCGCQ00296487
SCGCQ00322603 - (Closed) - Utilities to show logical block size [AF512e, 512n, 4Kn,..]

NVDATA
SCGCQ00333522 - (Closed) - Degraded performance comparison With the latest MR 5.3 -MR_3.190.25.1887
SCGCQ00351785 - (Closed) - Fault LED behavior in OEM Blades

UEFI Driver
SCGCQ00369636 - (Closed) - UEFI: Settime only when FW time is not set; DHP: Return appropriate health status when there is no critical boot message
SCGCQ00340581 - (Implemented) - UEFI Driver should check pMRCtrlInfo ->maxHANodes with > 1
SCGCQ00310476 - (Implemented) - Load HII when user responds to critical boot message by pressing C

HII
SCGCQ00378089 Headline: HII hangs when trying to enter Configuration Management while in Safe Mode
SCGCQ00378414 HII message for Safe Mode is not clear
SCGCQ00378831 Headline: HEFU: Controller Status should reflect safe mode + dont log debug messages in serial port


LSISAS2108, MR4.10, v12.13.0-0151:
http://www.lsi.com/downloads/Public...30.383-2230.zip
LSISAS2008, MR4.10, v2.130.384-2166:
http://www.lsi.com/downloads/Public...30.384-2166.zip
Bug Fixes and Enhancements:
===========================
Firmware:
SCGCQ00341980 - (Closed) - Current Access policy is not getting updated for iMR
SCGCQ00353935 - (Resolved) - Add support for Ringbuffer and Dq compilation
SCGCQ00356925 - (Closed) - disableHII: Needs to be updated from nvdata into MFCD
SCGCQ00357046 - (Closed) - 9240-4i on particular motherboard is not getting required memory resources on boot
SCGCQ00349562 - (Closed) - Unable to open "Set Patrol Read Properties" in MSM with 2008-iMR
SCGCQ00362340 - (Closed) - multi path with Consistency Check LED behavior problem
SCGCQ00342405 - (Implemented) - Enable or disable 512E using Applications
SCGCQ00342397 - (Implemented) - Provide the count of LBAs that are present in the sata bbm table.
SCGCQ00350996 - (Closed) - Fail the IO in case the medium error recovery is taking more time.
SCGCQ00359200 - (Port_Complete) - offline drive becomes automatically online during Raid Level Migration
SCGCQ00371803 - (Port_Complete) - During Reconstruction (R0->R5) when system reboots the reconstruction doesnt resume. System hangs.
SCGCQ00358361 - (Port_Complete) - Bad disk being serviced hung Linux boot for 2 hours
SCGCQ00373802 - (Port_Complete) - Auto Foreign import fails when controller is booted with pinned cache.

UEFI Driver:
SCGCQ00347171 - (Closed) - MR: on having pinned cache on OEM controller, the option to invoke storage dosent come.
SCGCQ00369636 - (Closed) - UEFI: Settime only when FW time is not set; DHP: Return appropriate health status when there is no critical boot message
SCGCQ00340581 - (Implemented) - UEFI Driver should check pMRCtrlInfo ->maxHANodes with > 1
SCGCQ00318101 - (Closed) - Timed critical boot message under UEFI mode
SCGCQ00347492 - (Closed) - UEFI: Retry read capacity if scsi status is not success
SCGCQ00310476 - (Implemented) - Load HII when user responds to critical boot message by pressing C

HII:
SCGCQ00268038 (DFCT) - Hii enter black screen/timeout when user switching between fields/form sub_form and during Pd rebuild.
SCGCQ00364156 (CSET) - Remove debug message which is not applicable for non Mercury customers