直接開起來做fully initialize比較快吧? 畢竟Background下去做一定是你不使用
該VD的時候而且也不會全速運作...
Dell官方文件參考:
Initializing Virtual Disks
CAUTION: A Full Initialization permanently destroys any existing data on that virtual disk.

Perform the following steps to initialize virtual disks:

1.On the VD Mgmt screen, select Virtual Disk # and press <F2> to display the menu of available actions.

2.Select Initialization and press the right-arrow key to display the Initialization submenu options.

3.Select Start Init. to begin a regular initialization or select Fast Init. to begin a fast initialization.

4.A pop-up windows is displayed indicating that the virtual disk has been initialized.

5.Repeat the procedures from step 1 to step 4 to configure another virtual disk.

The PERC H700 or PERC H800 cards support up to 64 virtual disks per controller. The currently configured virtual disks display on the screen.