應觀眾要求~~~來貼個裝水冷流程(每一種可能都有點不一樣但是大抵來說是一樣的)

First

把包裝打開(ㄎㄎ...不要打我...真的是第一步)


會看到以下零件:

Water Block(好像比一般的重 應該是底後吧~)

Universal Clip(有P4 K7 以及未來上市的K8相容性不錯)

Copper Radiator(8*8的喔很安靜)

Dim: 86x130x89 mm
Material: Copper Pipe with Staged Copper Fin
Fan Dim: 80x80x25 mm
Fan Rated Voltage: 12V
Fan Rated Current: 0.14A
Fan Power Input: 1.68W
Fan Speed: 2400 ± 10% RPM
Max. Air Flow: 38.4 CFM
Noise: 22 dBA
Life Expectancy: 50000 hr.
Connector: 3 Pin
Weight: 410g

DC 12V Water Pump(輕巧實用)

Dim: 100x50x86 mm
Rated Voltage: 12V
Rated Current: 0.16A
Power Input: 2W
Water Pressure: 1.2 kg/cm2
Pump Speed: 90 L/hr
Connector: 3 Pin
Noise: 20 dBA
Bearing Type: Ceramics Bearing
Life Expectancy: 50000 hr.
Weight: 230g

Back-up Receiver(我沒裝上去..因為只用水箱已經很夠嚕)

Intelligent Water Tube(這個很好用...防止管子變形彎曲阻礙水流通)


續下篇......