電腦超頻 HOW to set BIOS?? Thks
 

電腦超頻 Question:

My system is P4 1.5G and PC133 128MB SD RAM & Abit BL7 motherboard
I want to 超頻,
but don't know how to set....

FSBRatio ?
Memory Freq(CPU:DRAM) ?
SpeedError Hold ?

AND how to check my RAM is PC133??

Thanks

首先把BIOS最佳化
再來進入SfotMenu III
一.把下圖選項設定為"自行定義"

二.下圖選項設為Fix PCI

三.調整外頻(注意顯示卡會在非正常頻率下運作)

四.外頻上不了可加壓

五.進入記憶體選項把參數調到最低

Are U using Abit BL7!!??

Why your BIOS screen is different with my screen??

And if I update my Flash BIOS..do I need to "clear " 1,2 to 2,3 for a few seconds..then back to 1,2. <--and why I need to do this??

Thanks

1.I'm using Abit KR7A.

2.This is Modbin.exe .

3.How to upgrade BIOS:

a. Boot into MS-DOS or "Safe mode and command prompt" if you are using
Windows95/98
b. Run "bldw76v.exe" to extract all files.
c. Run "runme.bat"

*** Please notice that we suggest you flashing the bios with switches

"/py /sn /cd /cp /cc /cks /R" or by "runme.bat".

"cc : Clean CMOS"
cd :Clean DMI

ABout Clean CMOS
 

About Clean CMOS!!

After I finished run the runme.bat, then turn off the power(unplug the power supply) and Clear the CMOS


Or

After I finished run the runme.bat, then config the BIOS, inside thw windows XP, then shut down, after that (nee to unplug the power supply) and Clear the CMOS??


Clear BIOS
1-2 ---> 2-3 for a few seocnds and put it back to 1-2 again?!!

BIG THANKS

Ps. my motherboard is diff !! So I think I can't use your Modbin.exe!!

我還是用中文吧
Clean CMOS:清除BIOS中的設定 ---->clear bios set.
Modbin.exe的功能是變更BIOS的預設值及開啟隱藏的設定.
Modbin.exe download: http://home.pchome.com.tw/world/koc...%e3/modbin6.exe

CMOS--->http://www.realworldtech.com/page.c...RWT050802020022

個人覺得這個是超頻最不易成功的組合…
舊製程p4的笑能和超頻副度之差是大家有目共睹的…
再加上搭配SDRAM，就成了殘缺不全的小明了…
不管怎麼超，笑能想多百分之五都很有困難…
建議打消念頭，省得陪了夫人有折了兵…
（要是還配TNT M64的話，3D就更慘不忍睹了…，會這樣配一定是店家配的，不然就是很缺德的朋友）

對不起喔,你的圖片我看不見,可不可以請你再弄一次~

請問有誰可以跟我說Fix PCI的選項要怎麼調阿~~~~有問跟沒問一樣,來點人理我一下好不好押~~謝謝啦