![]() |
PCDVD數位科技討論區
(https://www.pcdvd.com.tw/index.php)
- 顯示卡討論區
(https://www.pcdvd.com.tw/forumdisplay.php?f=8)
- - [問題]有沒有人用MSIGf3Ti200+公版驅動+WinXP狂當機的....
(https://www.pcdvd.com.tw/showthread.php?t=120178)
|
|---|
[問題]有沒有人用MSIGf3Ti200+公版驅動+WinXP狂當機的....
我上網也當,玩WC3也當,看NVDVD也當,有沒有解決方法呢??
-------------------------------------------------------------------- Pentium4 2.0AG Sumsung DDR266 256MB MSI MS-6547 645 Ultra (使用BIOS預設值) MSI Geforce3 Ti 200 pure 64 MB DDR Windows XP Home Edition TC 用過雷管 29.42&29.80 ......... |
我沒有發生你說的情形ㄝ:)
MSI Geforce3 Ti 200 pure 64 MB DDR(未超)+Windows XP Pro+29.42 |
重裝winxp試試看
也有可能是作業系統版本的因素 |
引用:
我的是一用29.42就會重開機 就算用了29.80也是 只有用了21.83才不會>< 害我還以為是power的問題 跑去買了一顆英誌360w的回來 有人知道這是什麼原因嗎 |
沒有當掉的情形
外面買的 msi gf3ti200粿板+技嘉7itxe+kingmax ddr 300 256mega+win xp pro
+公版程式 29點42… 沒當… 現在用msi gf4ti4600也沒當… 顯卡跟人家換一塊或是其他的東西做交差比對會比較好… 程式影響的因素應不大… |
引用:
我的是剛重灌的(一天)∼∼ |
I have pny g3 ti 200 ( which is the same as msi) with 28.32 driver. Running under win xp, intel celeron 1.2 GHz, Intel mobo. No problem so far. I did not overclock the card though.
Not sure wher your problem may be, but maybe it's too hot? If you say that the new driver cause problem, why not just use 28 drivers. |
我在使用上也沒有問題說...
拿去別台機器試試看... 還是卡本身有問題..... |
有超頻嗎
檢查一下記憶體 |
我也是用29.42
用ABIT ge3 ti 200 128MB 系統XP..也很正常使用 |
| 所有的時間均為GMT +8。 現在的時間是11:50 AM. |
vBulletin Version 3.0.1
powered_by_vbulletin 2026。