![]() |
PCDVD數位科技討論區
(https://www.pcdvd.com.tw/index.php)
- 顯示卡討論區
(https://www.pcdvd.com.tw/forumdisplay.php?f=8)
- - KMPlayer 第二代 +PotPlayer+ 繁中版
(https://www.pcdvd.com.tw/showthread.php?t=823942)
|
---|
引用:
我套用新設定都會習慣重開player再開一次檔案 所以應該不是這緣故... 相同設定在簡中版是正常的 |
放某些mp3似乎有些bug存在
一首可能是2~3分鐘的音樂,在清單上顯示會變10多分 而且還無法跳到下一首或重覆撥放,似乎真的要等到清單上的時間才會跳 |
我這邊試用的結果也有些問題
potplayer 在開檔如 avi、mkv、rmvb、mp4 或者掛虛擬光碟的ISO檔時 KMPlayer 確實遠非對手,相較之下真的快很多 但是在把iso檔直接丟給player的情況下km會比較穩定,因為這邊我直接丟給potplayer 有很高的機會,會造成程式沒有回應,可能還不是正式版的關係還不太穩吧 目前 potplayer 可以用來撥大部份的檔,但 kmplayer 還是留著好,備用 :D |
引用:
這問題我也有 想說停掉內建的字幕自己加進Vobsub 結果是有動作了(綠色箭頭有出來) 但是卻沒有功能(無反應) 字幕特效一樣顯示不出來 設定字體也沒有反應 看來這個BETA版本還有很長一段路要走...... |
引用:
好特別的桌面,可以請問用什麼軟體做出來的效果? potplayer測起來效果不錯,尤其是滑鼠拖著前進後退,完全不delay! |
檔案連結失效了....希望有板友再分享一下
|
|
撥不動的硬體
還是撥不動 我換了這播放器之後 還是一樣跑不動 金剛1080P H.264 P4 2.8 CG +ATI X850 X850根本也沒硬解功能 還是不要異想天開的好 :laugh: |
看來問題還是很多
等下一版再試試囉 |
PotPlayer播放會有水波紋
PotPlayer不管設定硬解與否,播放下面這個檔案時每隔幾秒畫面就會明顯有水波紋產生,
但Kmplayer播放就很正常.不過不知道Kmplayer播放時是硬解還是軟解?不會設定.. Gigabyte GA-MA78GM-S2H DualCore AMD Athlon 64 X2 Black Edition, 5000+... 2 GB DDR2-800 DDR2 SDRAM*2 ATI Radeon HD 3850 Series (512 MB) [KMPlayer擷取訊息] General Complete name : X:\[HDTV] MBC LIVE Wonder Girls So Hot 1920X1080 08.06.07.mpg Format : MPEG-PS File size : 368 MiB Duration : 2mn 56s Overall bit rate : 17.5 Mbps Video #E0 Format : MPEG Video Format version : Version 2 Format profile : Main@High Format settings, Matrix : Standard Duration : 2mn 55s Bit rate mode : Constant Bit rate : 16.1 Mbps Nominal bit rate : 17.2 Mbps Width : 1920 pixels Height : 1080 pixels Display aspect ratio : 16/9 Frame rate : 29.970 fps Colorimetry : 4:2:0 Scan type : Interlaced Scan order : Bottom Field First Bits/(Pixel*Frame) : 0.277 Audio #80 Format : AC-3 Format/Info : Audio Coding 3 Duration : 2mn 56s Bit rate mode : Constant Bit rate : 192 Kbps Channel(s) : 2 channels Channel positions : L R Sampling rate : 48.0 KHz Video delay : -299ms |
所有的時間均為GMT +8。 現在的時間是04:34 AM. |
vBulletin Version 3.0.1
powered_by_vbulletin 2025。