PCDVD數位科技討論區 - 【轉】外媒：台灣一線廠確認，SKYLAKE可上 1.5V/1.65V DDR3模組

PCDVD數位科技討論區 (https://www.pcdvd.com.tw/index.php)

- 系統組件 (https://www.pcdvd.com.tw/forumdisplay.php?f=19)

- - 【轉】外媒：台灣一線廠確認，SKYLAKE可上 1.5V/1.65V DDR3模組 (https://www.pcdvd.com.tw/showthread.php?t=1086744)

【更新】

引用:

http://www.tomshardware.com/news/sk...port,30185.html

Skylake's IMC officially supports only DDR3L with a voltage of 1.35, and it officially supports DDR4 at 1.2 V. This might seem a little counter-intuitive to some users, as the entire reason for continuing DDR3 support is to make it cheaper and easier for customers to upgrade to the new Skylake platform, but these voltages are likely used to avoid damaging the IMC. Although it would be nice to use any DDR3 from 1.35 V - 1.65 V, running at these higher voltages could burn out the IMC and kill the processor over time.

長期使用 1.5v～1.65v的ddr3可能導致 cpu損壞。

:ase

市面上都已經一大堆 DDR3 的 SkyLake 的板子了，要是真的有問題早被罵翻了，主機板原廠那邊的【耐受性】測試應該也會過不了。

DDR3-1333也可以使用

目前組了一套驗證中

看起來沒問題