to obt : 不好意思！想要請教你，奴果放在硬碟裡，
是不是比教好！

[這篇文章曾被 jack1205 重新修正編輯過 (時間 03-01-2000).]

To jack1205,

如果你的CPU夠力, 可以試試
capture settings ---> resize filter=Hanning Widowed Sinc.
據說畫質較好.

由光碟片直接轉vcd, 或抄到硬碟再轉vcd,
你可以轉五分鐘影片試一試其效果.

to obt : 不好意思！想要再請教你，我用dcsee壓到
E 碟，開始設定時，在play b.....時，
畫面只有黑的！
硬碟的燈也都不動，不知這種情形要
如何設定！！！謝謝！！！

To jack1205,

你有沒有Enable Decoder ?

TO Obt OK!我試一試！！！

[這篇文章曾被 jack1205 重新修正編輯過 (時間 03-03-2000).]

為何我在使用時沒有聲音?
解出來二個檔 *.mpv and *.mpa
要如何合併 *.mpg

To Tino:

用Xing Mpeg Encoder, 在readme.txt有寫:

To create a system mpg file (used by the VCD creator programs) you need an mpg
multiplexor. For that you could use the mplex program that is open source
( go to http://www.mpeg.org for the files). My experience with this program is
that the result on the vcd is impossible to browse in with media player. The
timing of the mpg file is not completely correct. A better multiplexor is the
XING mpg encoder kit. If you installed this encoder (v2.2) open the program,
create a new Job, Select NTSC or PAL VideoCD in the Job wizard and select the
video mpg stream (.mpv) as Video Filename and the audio mpg stream (.mpa) as
Audio Filename. Fill in the Target Filename, select Finish and press the
"Encode" button. Now a correct mpg file will be created. Don't worry, the Xing
encoder doesn't actually encode the video streams, it only multiplexes them.

The resulted .mpg file can be used in VCD creators like Nero or Easy CD creator
to make VCDs.

請問Xing Mpeg Encoders哪裡有呀?
還有一片130分鐘的ｄｖｄ要轉多久?
我轉了３小時才轉成２０分鐘是否正常?
cpu為P3-450 oc 600
另外音效是要選 Stereo 還是 DOLBY_SURROUND?
謝謝!!

To Tino,

1. http://www.dvdsoft.com.ar/files/dvd2mpg1_15.zip

DVD2MPG Squeezer version 1.15 full version include the MPEG encoder plugin and Xing MPEG encoder.

--------------------------------------------------------------------------------------------------------------------

ftp://member.myrice.com/czy/dl5/xme220.zip

XingEncoder 2.20 完全版

2. 有點慢.

3. 都可以.