弄來一張raid 卡 fastrast 100tx2

進去後有六個選項
但不管我選一(auto)
或手動
作raid 1
都會到12%時出現下列的字


the array is in critical state plase replace the defective drive immediately
or press enter key to continue boot


我有找到趨動,放在磁片裡了
我猜是找不到趨動的問題
但是他好像也沒有提示 按f6安裝什麼的



我在xp裡面有更新了可以用
晶片有顯示出來
但磁碟管裡沒看到硬碟不知為何?
有錯嗎?

p.s我不是要重裝系統,是兩顆硬碟要作raid 1

hd~確認無故障
兩顆都137g以下~兩顆80g

我趨動可以讓原本xp找不到的晶片辯認~
還是要另外裝什麼?
要用軟体控制嗎(磁碟管理看不到)






我作了raid 0進入xp之後會自動抓就ok了...............

但是raid 1怎麼用都不行

重開後會出現

critical status a disk member of a disk member of a mirrored arry has failed or is not
responding the array is still functional, but fault tolerance is disabled
before continuing power off the system and confirm
that the drives and rebuilding the array

1 identify which drive has failed with the 3 define array menu option
2 power off the system replace the failed drive

3 pestart the system and enter the fastbuild setup menu
4 choose the 5 option to rebuild the array with replacement drive

我有選了第五個rebuild 但是到12%一樣給我出現

the array is in critical state plase replace the defective drive immediately
or press enter key to continue boot