*停權中*
加入日期: Jan 2015
文章: 406
|
DDR3跟DDR3L電壓不一樣,可以直接拿來插嗎
|
|||||||
2016-11-08, 05:46 PM
#11
|
Elite Member
加入日期: Feb 2004 您的住址: 台北
文章: 4,267
|
引用:
可以直接插 不能用的話只會不開機而已 不會爆炸 |
|||
2016-11-08, 05:58 PM
#12
|
Senior Member
加入日期: Dec 2004
文章: 1,001
|
用久了 CPU真的會往生嗎?
我弟的電腦就是這一代的I5配DDR3的版子 沿用舊的記憶體 |
2016-11-08, 06:00 PM
#13
|
*停權中*
加入日期: Jan 2015
文章: 406
|
聽說用1.5V對 Skylake CPU有傷害,這是真的嗎
|
2016-11-08, 06:00 PM
#14
|
*停權中*
加入日期: Jun 2015 您的住址: 金一十大女支三
文章: 1,282
|
The default voltage of DDR4 is 1.2V. You might recall that one of the benefits of the DDR4 memory standard is the increased power efficiency. This also means that the memory controller designed for such a standard will naturally be able to tolerate less extreme voltages. DDR3 memory on the other hand is actually 1.5Vs. Now the primary problem is that Intel has officially listed support for DDR3L standard, not DDR3, which actually has a voltage of 1.35V. And it is DDR3L, which is supported with Skylake.
Ofcourse, if you plugin DDR3 memory (provided your motherboards has the necessary slot), it will run. But prolonged use can (and will) damage your brand new Skylake chip (or the IMC inside it to be more precise) – especially if you are running enthusiast memory with high voltages (1.65V). That leaves migrating users with a budget problem only with DDR3L memory, which officially runs at 1.35V. Ofcourse it goes without saying that most motherboards that hit the mainstream market only support the DDR4 standard. Very few will have support for DDR3L and even those who do have so, will have separate slots for both standards and will not allow simultaneous use of both standards. The new UniDIMM memory standard from Intel allows users of the mobile platform to enjoy both DDR3L and DDR4 Memory on the same slot. Prominent AIBs such as Kingston, Micron and many more are fully supporting this initiative. This upgrade to the current SO-DIMM standard has made the notebook market more user friendly and also helped drive the sector that most Investor’s care about. We have seen motherboards in the past which supported both DDR2 and DDR3 but that was by utilizing multiple RAM slots. The UniDIMM standard will only have one slot for both generations. http://wccftech.com/skylake-does-no...age-ddr3l-only/ 簡單來說 你對Memory Controller Over Voltage 所以損壞可能性很大 特別是這樣升級的很多是要插DDR3超頻記憶體 也就是DDR3-2133/2400 這兩者標準電壓分別是1.60V / 1.65V 此文章於 2016-11-08 06:07 PM 被 lzarconlony1 編輯. |
2016-11-08, 06:05 PM
#15
|
Junior Member
加入日期: Oct 2013
文章: 943
|
還好我現在有8條老金的4G DDR3 1600 LOVO.那天無聊想搞個6代+DDR3來玩也不用擔心.~~
|
2016-11-08, 08:19 PM
#16
|
Senior Member
加入日期: Oct 2011
文章: 1,017
|
剛好手上有D3L的條子,看到跳水的Z170就入手了,反正跟H110 D4價差不多,把它當H110使用就好...記憶體現在貴森森,湊合著用..
|
2016-11-25, 08:42 AM
#17
|
Advance Member
加入日期: Nov 2006 您的住址: 台灣某一個角落
文章: 467
|
哈...等DDR5
那時就有單條32GB了 目前DDR3撐著用 |
2016-11-26, 12:18 AM
#18
|
*停權中*
加入日期: Jun 2015 您的住址: 金一十大女支三
文章: 1,282
|
比較希望手機平板有8GB DRAM
電腦16GB以上會妥善利用其實根本就不會用滿 再大也沒什麼意思 至少這幾年看起來是這樣 |
2016-11-26, 12:50 AM
#19
|
Golden Member
加入日期: Dec 2001
文章: 2,875
|
Kaby Lake明年1月5日發售,現有的100系列晶片組也能用的樣子,
到時候DDR4的板子應該會降價吧 看到Skylake的算質數當機bug,實在買不太下去 |
2016-11-26, 10:11 AM
#20
|