New Member
加入日期: Jan 2005
文章: 2
|
誰能幫我看看問題所在啊??????
燒錄錯誤訊息如下...請問哪個大大能幫我解說一下....一直燒不起來耶....殘唸.....
oil 1A20-0217-0000-1286-0943-5455* Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 2003/6/17 下午 09:25:04 Nero版本: 6.0.0.20 (Nero Express) 燒錄器: <ASUS CRW-5232AS> 版本: 1.01 - HA 1 TA 0 - 6.0.0.20 界面卡驅動程式: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <ASUS CD-S500/A >版本: 1.5D - HA 0 TA 1 - 6.0.0.20 界面卡驅動程式: <atapi> HA 0 === Scsi-Device-Map === DiskPeripheral : MAXTOR 6L040J2 atapi Port 0 ID 0 DMA: On CdRomPeripheral : ASUS CD-S500/A atapi Port 0 ID 1 DMA: Off CdRomPeripheral : ASUS CRW-5232AS atapi Port 1 ID 0 DMA: On CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 4 ID 0 DMA: Off === CDRom-Device-Map === ASUS CD-S500/A E: CDRom0 ASUS CRW-5232AS F: CDRom1 AXV CD/DVD-ROM G: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 639MB (654880kB) Free physical memory: 402MB (412336kB) Memory in use : 37 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 9.1.2005 CD-ROM(ISO) 下午 12:30:20 #1 Text 0 File Isodoc.cpp, Line 5954 Iso document burn settings ------------------------------------------ Determine maximum speed : TRUE Simulate : TRUE Write : FALSE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 下午 12:30:20 #2 Phase 97 File dlgbrnst.cpp, Line 1843 啟動FlextraLink 下午 12:30:20 #3 Text 0 File Reader.cpp, Line 118 Reader running 下午 12:30:20 #4 Text 0 File Writer.cpp, Line 127 Writer ASUS CRW-5232AS running 下午 12:30:20 #5 ISO9660GEN -11 File geniso.cpp, Line 3882 First writeable address = 0 (0x00000000) 下午 12:30:20 #6 Text 0 File Burncd.cpp, Line 3213 Turn on 軌道一次燒錄(TAO), using CD-R/RW media 下午 12:30:20 #7 Text 0 File DlgWaitCD.cpp, Line 233 Last possible write address on media: 359848 (79:59.73) Last address to be written: 135792 (30:12.42) 下午 12:30:20 #8 Text 0 File DlgWaitCD.cpp, Line 238 Write in overburning mode: FALSE 下午 12:30:20 #9 Text 0 File DlgWaitCD.cpp, Line 1997 Recorder: ASUS CRW-5232AS; CDR code: 00 97 28 12; OSJ entry from: GIGASTORAGE CORPORATION ATIP Data: Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00) Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 下午 12:30:20 #10 Text 0 File DlgWaitCD.cpp, Line 398 >>> Protocol of DlgWaitCD activities: <<< ========================================= 下午 12:30:20 #11 Text 0 File ThreadedTransferInterface.cpp, Line 772 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 135793 (135793) = #135793/30:10.43 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 135791 blocks [ASUS CRW-5232AS ] -------------------------------------------------------------- 下午 12:30:20 #12 Text 0 File ThreadedTransferInterface.cpp, Line 941 Prepare recorder [ASUS CRW-5232AS ] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 278411264, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 135793 | lead-out | 1 | 0x00 | 0x41 下午 12:30:20 #13 Text 0 File ThreadedTransferInterface.cpp, Line 968 Removed 2 run-out blocks from end of track 1. 下午 12:30:20 #14 Phase 24 File dlgbrnst.cpp, Line 1843 檔案暫存作業開始 下午 12:30:20 #15 Phase 25 File dlgbrnst.cpp, Line 1843 檔案暫存作業完成 下午 12:30:20 #16 Phase 28 File dlgbrnst.cpp, Line 1843 速度測量開始 下午 12:30:20 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2153 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 下午 12:31:30 #18 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 下午 12:31:30 #19 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 下午 12:31:30 #20 Phase 29 File dlgbrnst.cpp, Line 1793 速度測量已完成:37.1x (5,568 KB/s) 下午 12:31:30 #21 Text 0 File Burncd.cpp, Line 4244 燒錄將以 24x 倍速進行, 因為讀取的速度太慢,燒錄器無法跟上 48x 倍速。 下午 12:31:30 #22 Phase 32 File dlgbrnst.cpp, Line 1843 以24x (3,600 KB/s)的速度開始模擬燒錄 下午 12:31:30 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2153 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 下午 12:31:30 #24 Text 0 File Mmc.cpp, Line 19251 Set BUFE: FlextraLink -> ON 下午 12:31:34 #25 SCSI -1024 File Cdrdrv.cpp, Line 1413 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02FB0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x08 Sense Qual: 0x03 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x04 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x08 0x03 下午 12:31:34 #26 CDR -1024 File Writer.cpp, Line 335 通訊失敗 下午 12:31:34 #27 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 下午 12:31:34 #28 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 下午 12:31:42 #29 CDR -201 File WriterStatus.cpp, Line 152 寫入狀態無效 ASUS CRW-5232AS\H1 T0 下午 12:31:42 #30 TRANSFER -18 File WriterStatus.cpp, Line 152 無法執行結束軌道 下午 12:31:42 #31 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 下午 12:31:42 #32 Phase 34 File dlgbrnst.cpp, Line 1843 以24x (3,600 KB/s)的速度模擬燒錄失敗 Existing drivers: File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86656 bytes, created 2001/10/10 下午 07:05:10 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) |
|||||||
2005-01-09, 12:45 PM
#1
|
Elite Member
加入日期: May 2002 您的住址: 台北松山
文章: 5,793
|
模擬就失敗了,
如果沒有超頻, 換排線試試。
__________________
我是老王 |
||
2005-01-10, 08:55 AM
#2
|
New Member
加入日期: Jan 2005
文章: 2
|
因小弟的電腦 IDE2好像怪怪的....所以又買了一片 IDE擴充卡....
IDE1 接 硬碟 + 光碟機 IDE擴充卡 接 燒錄機................. 這樣接會有問題嗎.....還是要怎麼接會比較好呢... 嘗試過 IDE擴充卡 (2個IDE插槽) 一個接光碟 一個接 燒錄機...還是一樣不行咧.....唉.. |
2005-01-11, 02:20 PM
#3
|
Elite Member
加入日期: May 2002 您的住址: 台北松山
文章: 5,793
|
IDE擴充卡 接 燒錄機,很容易會有問題,
先把燒錄機接ON BOARD上面試試, IDE擴充卡 接 光碟機看運氣。
__________________
我是老王 |
2005-01-11, 05:17 PM
#4
|