CDcheck can do that.

经过好心人的提醒，我试了一下dvdinfo的比对光盘与镜像的功能，显示的结果是：光盘结尾处出现了不同的地方，显示为：

sector:926C6h
differences:
LBA=927CFh Byte=30720 ISO=2h DISc=0h
LBA=927CFh Byte=30722 ISO=2h DISc=0h
LBA=927CFh Byte=30724 ISO=CDh DISc=0h
LBA=927CFh Byte=30728 ISO=1Eh DISc=0h
LBA=927CFh Byte=30729 ISO=B5h DISc=0h
LBA=927CFh Byte=30730 ISO=F0h DISc=0h
LBA=927CFh Byte=30731 ISO=7h DISc=0h
LBA=927CFh Byte=30732 ISO=CFh DISc=0h
LBA=927CFh Byte=30733 ISO=29h DISc=0h
LBA=927CFh Byte=30734 ISO=9h DISc=0h
LBA=927CFh Byte=30737 ISO=80h DISc=0h
LBA=927CFh Byte=30740 ISO=20h DISc=0h
LBA=927CFh Byte=30745 ISO=80h DISc=0h
LBA=927CFh Byte=30748 ISO=30h DISc=0h

这些说明了什么问题呢？
我明明封盘了啊....
是不是我选择的刻录模式错了？我选的是mode1啊....
log如下：

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004-10-26 17:35:34
Nero版本： 6.6.0.3
刻录机： <PIONEER DVD-RW DVR-106D>版本: 1.08 - HA 2 TA 0 - 6.6.0.3
适配卡驱动程序： <IdeChnDr> HA 2
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <AXV CD/DVD-ROM >版本: 2.2a - HA 0 TA 0 - 6.6.0.3
适配卡驱动程序： <a347scsi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 0 ID 0 DMA: Off
DiskPeripheral : ST360021A IdeChnDr Port 1 ID 0 DMA: On
DiskPeripheral : QUANTUM FIREBALL SE2.1A IdeChnDr Port 1 ID 1 DMA: Off
CdRomPeripheral : PIONEER DVD-RW DVR-106D IdeChnDr Port 2 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-ROM DVD-121S IdeChnDr Port 2 ID 1 DMA: Off

=== CDRom-Device-Map ===
AXV CD/DVD-ROM H: CDRom2
PIONEER DVD-RW DVR-106D N: CDRom0
PIONEER DVD-ROM DVD-121S M: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 138MB (142272kB)
Memory in use : 72 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

12.12.2004
刻录DVD镜像
13:21:54 #1 Text 0 File Reader.cpp, Line 127
Reader running

13:21:54 #2 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-106D running

13:21:54 #3 Text 0 File Burncd.cpp, Line 3151
Turn on 光盘一次刻录, using DVD media

13:21:55 #4 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 600015 (133:20.15, 1171MB)

13:21:55 #5 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)

13:21:55 #6 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: PIONEER DVD-RW DVR-106D, Media type: DVD-R
Disc Manufacturer: TYG01 -
Disc Application Code: 64, Disc Physical Code: 193

13:21:55 #7 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

13:21:55 #8 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM模式1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 600166 (600166) = #600166/133:22.16
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 600166 blocks [PIONEER DVD-RW DVR-106D]
--------------------------------------------------------------

13:21:55 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [PIONEER DVD-RW DVR-106D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1229139968, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
600166 | lead-out | 1 | 0x41 | 0x00

13:21:55 #10 Phase 24 File dlgbrnst.cpp, Line 1832
文件暂存过程开始

13:21:56 #11 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.

13:21:56 #12 Phase 25 File dlgbrnst.cpp, Line 1832
文件暂存过程完成

13:21:56 #13 Phase 36 File dlgbrnst.cpp, Line 1832
以4x (5,540 KB/s)的速度开始刻录

13:21:56 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

13:21:56 #15 Text 0 File DVDR.cpp, Line 2248
Recording mode: Sequential Recording Mode

13:21:56 #16 Text 0 File Mmc.cpp, Line 21025
Set BUFE: Buffer underrun protection -> ON

13:21:56 #17 Text 0 File DVDR.cpp, Line 2389
Start write address at LBA 0
DVD high compatibility mode: Yes

13:21:56 #18 Text 0 File Cdrdrv.cpp, Line 8315
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

13:21:59 #19 Text 0 File Cdrdrv.cpp, Line 1282
13:21:59.404 - PIONEER DVD-RW DVR-106D\H2 T0 : Queue again later

13:26:04 #20 Text 0 File WriterStatus.cpp, Line 116
<PIONEER DVD-RW DVR-106D> start writing Lead-Out at LBA 600166 (92866h), lenght 0 blocks

13:26:05 #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

13:26:05 #22 Text 0 File DVDR.cpp, Line 2632
EndDAO: Last written address was 600175

13:26:29 #23 Phase 37 File dlgbrnst.cpp, Line 1832
以4x (5,540 KB/s)的速度刻录完毕


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 2003-10-28 18:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\IdeChnDr.sys': Ver=?.?.?.?, size=101431 bytes, created 2002-10-15 0:00:00 (Adapter driver for rec)
File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 2004-4-30 9:33:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)