瀏覽單個文章
誰不重要
Junior Member
 

加入日期: Nov 2016
文章: 716
網上搜一下, 除更新韌體外, 似乎就是DSP芯片的問題, 一是可能DSP芯片脫焊, 要用熱風槍吹一吹, 又或DSP芯片損壞, 要更換新DSP芯片(或可能整塊底板更換)

http://www.justanswer.com/tv-repair...e-flashing.html
引用:
The "UE22" error on any Pioneer HT receiver, is generated by the DSP processor chip in the receiver, and it's caused by either the software failure on this chip (about 25% of the time), or more often by this chip needing to be re-heated using a heat gun to re-flow the solder on the PCB around it. The reason for this is the chip generates a LOT of heat and the solder joints on the PCB expand and contract causing them to lose contact.
If you have not already, I would suggest trying to update the Firmware of the receiver. The instructions to do so, as well as the update itself, are available at the link below through Pioneer:
http://www.pioneerelectronics.com/P...Receivers/SC-61
If this does not work, or works "intermittently" (meaning you can get some time of playback, but a random occurrence of the UE22 error), then unfortunately it does require the receiver be brought in to BB to have them send it out to Pioneer to fix or replace the SP chip as needed.
 
舊 2017-03-05, 06:59 PM #2
回應時引用此文章
誰不重要離線中